
GRAINBENCH ORIGINALS · FREE SCROLL SAW & LASER PATTERN
Wish on a shooting star
A wish with a softer sweep.
A softly rounded five-point star flows into curved comet ribbons, with a little star window and two sweeping streak openings. This redesigned flat cutout brings a gentler sense of movement to a small night-sky keepsake.
Choose your download
Free files, no account needed. Print a PDF for the scroll saw, or grab the laser files below.
For laser cutters
Smooth red cut lines at actual size (mm), no border box. Works in LightBurn, xTool Creative Space and Glowforge. Cut inside openings first.
Laser settings & tipsSee the cutting guide
White stays. Grey is waste. The surrounding rectangle is scrap, not the finished shape.
Before your first cut
Cut the star window and the two enclosed streak openings first. Support the curved tail ribbons and star points, keeping all joins at the printed width.
- Stock
- Flat, sound 6 mm plywood is suggested practice stock. Check your actual wood, blade and narrow points before cutting.
- Cut order
- Cut the enclosed openings first, then the outside boundary.
- Print scale
- Actual size / 100%. Turn off Fit to page and measure the 50 mm check line.
- Finished piece
- A flat decorative cutout, not a toy design. No stand, mounting system or hardware is included.
Digital geometry checked; not physically cut-tested. Digitally connected wood is not a strength guarantee; inspect the shape at your chosen size.
Usage terms & how this pattern was made
You may make physical items for yourself, gifts or commercial sale. You may not sell or redistribute the pattern files, printed pattern sheets or modified digital versions. Read the full pattern usage terms.
Created for GrainBench with AI-assisted artwork, processed through our Pattern Maker engine and checked for disconnected wood. Wood images are concept illustrations, not photographs of physically cut projects.
Quiet crescent moon ↗︎
Little ringed world ↗︎
Morning ray sun ↗︎