Free scroll saw patterns
30 original shapes to print, cut and make your own. Always free.
Filters
ANIMALS · OUTLINE CUTS
Curled woodland fox
A woodland daydream, curled into one little fox.
↔ 150 × 94.9 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
OCEAN · OUTLINE CUTS
Little ocean whale
A pocket-sized ocean adventure.
↔ 150 × 74.8 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
NATURE · OUTLINE CUTS
Woodland mushroom
A tiny treasure from an imaginary forest floor.
↔ 150 × 134.8 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
NATURE · OUTLINE CUTS
Garden leaf
A little piece of the garden, made to keep.
↔ 150 × 89.4 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
ANIMALS · INTERIOR CUTS
Little woodland owl
Two bright eyes and a whole lot of woodland personality.
↔ 150 × 186.6 mm◉ 2 inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Drill a blade-entry hole within each enclosed waste area, then cut those openings before the outside boundary. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
ANIMALS · OUTLINE CUTS
Mountain bear
A small bear with a big sense of adventure.
↔ 150 × 85.6 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
ANIMALS · OUTLINE CUTS
Meadow rabbit
A quiet little visitor from the meadow.
↔ 150 × 185.6 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
ANIMALS · OUTLINE CUTS
Hedgerow hedgehog
A pocketful of woodland personality.
↔ 150 × 94.9 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
NATURE · OUTLINE CUTS
Meadow flower
A little bloom that never needs watering.
↔ 146.1 × 190 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
NATURE · OUTLINE CUTS
Little woodland acorn
Big woodland plans start small.
↔ 150 × 178.2 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
NATURE · OUTLINE CUTS
Forest pine tree
A tiny patch of evergreen calm.
↔ 150 × 170.5 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
OCEAN · OUTLINE CUTS
Little sea turtle
Taking the scenic route through the sea.
↔ 150 × 141.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
OCEAN · OUTLINE CUTS
Leaping dolphin
A little leap of seaside joy.
↔ 150 × 118.8 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
OCEAN · OUTLINE CUTS
Gentle seahorse
A small curl of ocean magic.
↔ 88.2 × 190.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
OCEAN · OUTLINE CUTS
Little sailboat
Ready for an afternoon of daydreams.
↔ 150 × 139.6 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
SEASONAL · OUTLINE CUTS
Harvest pumpkin
A little harvest cheer, minus the carving.
↔ 150 × 131.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
SEASONAL · OUTLINE CUTS
Festive fir tree
A star-topped tree with handmade cheer.
↔ 150 × 176.6 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
SEASONAL · OUTLINE CUTS
Winter mitten
A small helping of winter warmth.
↔ 145.2 × 190 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
SEASONAL · OUTLINE CUTS
Snow-day snowman
A snow day that can stay a little longer.
↔ 121 × 190 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
SEASONAL · OUTLINE CUTS
Holiday bauble
One simple shape, plenty of festive possibilities.
↔ 150 × 185.7 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
HOME · OUTLINE CUTS
Little keepsake heart
A little wood, a little love.
↔ 150 × 131.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
HOME · OUTLINE CUTS
Garden birdhouse silhouette
A little home for a garden daydream.
↔ 150 × 142.8 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
HOME · OUTLINE CUTS
Cosy teapot
Put the kettle on and make a little something.
↔ 150 × 91.2 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
HOME · INTERIOR CUTS
Morning mug
For the person who always puts the coffee on.
↔ 150 × 119.9 mm◉ 1 inside cut
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Drill a blade-entry hole within each enclosed waste area, then cut those openings before the outside boundary. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
HOME · OUTLINE CUTS
Little cottage
A small place to call your own.
↔ 150 × 127.2 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
FAITH · OUTLINE CUTS
Grace cross
A quiet symbol, made with care.
↔ 138.4 × 190 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
FAITH · OUTLINE CUTS
Jesus the Good Shepherd
A small reminder of care and belonging.
↔ 82.8 × 190.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
FAITH · INTERIOR CUTS
Holy Family nativity
A quiet Christmas moment, held in wood.
↔ 150 × 85.7 mm◉ 2 inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Drill a blade-entry hole within each enclosed waste area, then cut those openings before the outside boundary. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
FAITH · OUTLINE CUTS
Hands in prayer
A gentle pause in a busy day.
↔ 109.3 × 190.1 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
FAITH · OUTLINE CUTS
Peace dove and cross
A little symbol of faith and peace.
↔ 150 × 171.5 mm✓ No inside cuts
See the cutting pattern
White stays. Grey is waste. Cut the shape boundary; the grey rectangle is surrounding scrap.
Cutting notes
Start from the waste edge and follow the exterior boundary. No blade-threading holes are needed. Leave the slender tips until last and support the work without forcing the blade.
Suggested practice stock: flat, sound 6 mm plywood. Use a blade suitable for your stock and the tightest turn; test the setup on scrap first. Sand the edges and finish as desired. This is flat decorative work, with no stand or hardware included.
Digital geometry checked; not physically cut-tested. Review narrow points, wood quality and blade access at your chosen size.
Download the black silhouette source ↓
No matching patterns. Try another search or clear your filters.
FROM SCREEN TO WORKBENCH
Print it. Check it. Make it yours.
- Print at actual size. Choose Letter or A4, turn off “Fit to page”, and measure the 50 mm check line.
- Keep the white shape. Grey areas are scrap. Cut any enclosed openings before the outside boundary.
- Check before cutting. Inspect thin tips and tight turns. These are digital patterns awaiting physical cut tests.
About these patterns & images
Created for GrainBench with AI-assisted artwork, processed through our Pattern Maker engine and checked for disconnected wood. Renders are illustrations, not photographs of completed projects. The downloadable outline defines the shape.
Sell your finished makes; never resell the pattern files. Read the usage terms ↓
Pattern usage terms
GrainBench grants you a non-exclusive, non-transferable permission to download these GrainBench Originals pattern files and use them to make physical items for personal use, gifts or commercial sale. You may sell the physical items you make. You may not sell, sublicense, redistribute, share or offer the digital pattern files, printed pattern sheets, source artwork or modified versions of those pattern files, whether separately, in a bundle or as part of another digital product. Link to this catalogue instead. This permission applies only to files identified as GrainBench Originals, only to the extent of rights GrainBench holds, and does not grant rights in third-party material.