Plan Studio
Choose your starting point
Drawing preview
This is a separate hole-marking helper, not the shelf-pin drilling layout for this project. Use it only after choosing hardware and confirming the required spacing, diameter, depth and edge distance.
Auto-fit preview: the drawing resizes to fit. Use the labeled dimensions and PDF measurements.
Customized part sizes/counts do not reshape the assembly elevations. Review the edited parts against the generated assembly before cutting.
What to check before building
Review loads, connections, shelf supports, movement and anti-tip anchorage for the actual installation. Matched layouts specify the selected dowel pins and shelf supports. Back fasteners, wall anchorage, doors and load ratings need a separate specification.
YOUR PIECES, READY TO CHECK
Your parts
Check your sizes, material and connections before downloading.
Build checks & open decisions
How the pieces fit together
See how the parts connect
Top and bottom: wooden pins (dowels) join them to the sides. Internal shelves use the support method selected in step 2; the matching plan pages show where to cut or drill.
Assembly steps
Tools & supplies for this plan
Save this project for later
Saves this plan in My builds so you can continue later. Your buying notes and prices are kept too.
Ready to prepare your supplies?
TAKE IT TO THE WORKSHOP
Download & print
Building from raw stock? Choose the complete workshop packet for cutting, drilling and assembly. The assembly packet includes parts and hardware, but leaves out machining coordinates.
Print at 100% / Actual size. Check the 50 mm ruler before using the plan.
More options: full-size paper templates
FULL SIZE ON YOUR HOME PRINTER
Tiled templates
Print the part selected below or a custom hole-spacing strip across multiple pages. The PDF adds overlap, matching registration crosses, row/column labels and a calibration ruler. These are reference templates; verify scale and the design before use.
The hole-marking strip is optional: a row of equally spaced circles for a custom marking task. It does not automatically match this cabinet or shelf-pin hardware.
Spacing is center-to-center along the strip’s length. Holes lie on the width centerline. This does not select hardware, drill depth, pilot size or a shelf-pin system.
- Use the same paper, orientation and margins selected above.
- Print at 100% and measure the calibration ruler before assembling.
- Trim only as needed, overlap duplicated areas, and match the registration crosses.
- Confirm the final dimensions physically before transferring marks or cutting.
Up to 60 template pages per export. Part outlines show the face only; thickness, joints and drilling locations are not inferred. Basic Latin text is used in PDF labels; SVG/PNG preserve other characters.
Tools & supplies for this project → · Geometry and exports are generated locally. Read our editorial approach and planning guides.
About Plan Studio & Saving
Choose a project, enter your sizes, and get a plan you can print. Free to use, with no account needed. Your work stays on this device. Learn to read your plan and cut list. Download a project file to keep a backup; clearing browser data removes the draft.